DIY Deity Jewellery: Necklaces- Part 4

Modifying Ready-Made Jewellery

This year for Gaura Purnima I wanted to try something different than the typical beaded jewellery I always make. I like buying ready-made jewellery and it them apart for the beads and other pieces. This is really versatile for small deities as most of the ready-made jewellery available will not fit properly.

In this case, I used two necklaces purchased from a local Indian clothing store. The necklaces are basically made of jeweled pieces that have a hole on each end separated by beads on two strands of wire. I simply snipped the wires and removed the beads and jeweled pieces. I like to use these pieces individually as earrings for Radha Govindaji or nose rings Jagannatha and Baladeva.

The basic technique for Radharani's and Gaura Nitia's necklaces are the same as the Multi-Stranded Necklaces with two needles being used. The two holes in the jeweled pieces were used to weave the seed beads being around the jeweled pieces. Govindaji's necklace was simply made with a single needle and just beading around the single jeweled piece creating a pendant. Radharani's crown was also made using a similar jeweled piece along with wire and seed beads, detailed instructions for these crowns will be posted shortly.

More pictures of my deities from Gaura Purnima can be found here.

DIY Deity Jewellery: Necklaces- Part 3

Multi-tier Necklaces

These necklaces are easy to make and the technique can be modified to add or subtract tiers. This style creates the look of multiple necklaces but because it is a single piece you don’t need to worry about different necklaces getting tangled, making dressing really simple.

Supplies:

1. Polyester Sewing Thread
2. Extra Fine Beading Needle
3. Seed Beads
4. Decorative Beads (5 crystal bi-cones and 6 glass beads)
5. Scissors
   Step 1: Begin by double stringing a generous length of the sewing thread on to your needle and tying a stop bead (simply tie a knot around a seed bead) towards the end, leaving a 3-4 inch tail.
   
   Step 2: String on 8-10 seed beads followed by a crystal bi-cone, then string on more seed beads to the desired length of the first necklace.
   
   Step 3: Next, string on one glass bead, a crystal bi-cone and three seed beads. To create the pendant, pass the needle back through the crystal bi-cone and pull the thread all the way through.
   
   Step 4: Complete the second side of the necklace with the glass bead, seed beads, crystal bi-cone and the seed beads. Then securely tie the ends of the string together.
   
   Step 5: Now to create the second tier pass the needle back through the seed beads and crystal bi-cone. Then you can begin stringing on your seed beads adding a few more than you did for the first tier to ensure this necklace will sit below the first one. Continue with the pattern as you did for the first necklace and securely tying off the thread.
   
   Step 6: At this point you could finish your necklace with two tiers, or you can repeat step five with more seed beads to create a third tier.

Some examples of these Multi-tier necklaces: Laddu Gopal’s and Radharani’s three tier necklaces were made using different patterns and beads for each tier. I really like these simple two tier necklaces as they make dressing my Gaura Nitai really easy.

DIY Deity Jewellery: Necklaces- Part 2

Chokers or Belts

I first came up with this technique making belts for my Radha Govindaji. One day I was dressing them I tried one of the belts as a choker and it looked great, so I recently made some more specifically designed as chokers. This design is for chokers for my Jagannatha and Baladeva, but the technique is so versatile it would make excellent belts or could be modified slightly to make chokers for smaller deities. Supplies:
1. Sewing Thread (I find polyester thread works best)
2. Extra Fine Beading Needles
3. Cord (I used heavy cotton string from my garland making kit, but you can also use embroidery floss in a matching colour)
4-6. Beads: For this design I used pearls, seed beads and glass bi-cones
7. Scissors

Step 1: Cut two lengths of the cord and tie 2-3 knots in the center of each length, thread each of the beading needles (make sure you have a generous amount of thread on each needle) and poke each needle through the knot in one piece of the cord and tie the ends of the thread securely together leaving a 2-3 inch tail (you will need this later).

Step 2: String 4-5 of the pearls through both of the needles. Then on each needle string a seed bead a pearl and another seed bead then another pearl through both needles. Repeat this pattern to the desired length, keep in mind that you want an even number of segments as you want an odd number of the hanging segments. In this case for five hanging segments there are six of these “base” segments.

Step 3: After you have completed the required number of base segments, string 4-5 of the pearls through both of the needles and poke each needle through the knot in the second piece of cord and tie the thread securely together.

Step 4: For this design there is only have one set of the hanging segments so one of the needles can be cut off at this point (if you wanted more hanging segments you would keep the second needle and just repeat the procedure for the hanging segments). Next, pass the remaining needle through the 4-5 pearls and the seed bead and pearl of the first base segment.

Step 5: To make the first hanging segment string on three seed beads and a glass bi-cone and another seed bead, then pass the needle back through the glass bi-cone and string on another three seed beads.

Step 6: Now pass the needle through the pearl of the next base segment, and continue with the base segments for the length of the necklace/belt. When you have completed your last hanging segment pas your needle through the 4-5 pearls at the end and securely tie off your thread using the tail you left earlier and trim off any excess thread.

Here is some of the jewellery I’ve made using this technique.

Photo 1: Radharani’s orange choker was made by varying the length of the hanging segments and overlapping the second set of hanging segments.
Photo 2: Baladeva wearing the choker described in this post.
Photo 3: Govindaji’s belt is one of my favourite pieces made with this technique, here the hanging segments were done slightly different by weaving the needle through the base segments.

Storing Deity Jewelery

Over the years I’ve tried a number of different options for storing my deities' jewellery and have found a system that works best for me. I've tried small plastic zip lock bags to store the jewelery sets that were then placed into larger zip lock bags with the matching outfit. However, the problem with this system is if you want to mix and match different jewellery you have to go searching through all the sets. As such, the system I currently use keeps all the jewellery easily on hand so it’s easy to find a specific item when you're dressing your deities. The system basically uses storage boxes you can find at any craft store. I use one with large compartments (designed to hold spools of thread) to hold the larger crowns and mukut pieces. This container also has some larger compartments (I believe designed to hold sewing scissors) that come in handy for storing flutes and other accessories. I also use similar containers with smaller adjustable compartments to store the necklaces, bracelets, and smaller crowns. When selecting your storage container look for one that has a lid that closes tightly, this will help keep the jari (metallic thread) work on the crowns and mukut pieces form tarnishing over time. Additionally, I find the inside of the lid comes in handy for storing peacock feathers. I just use blutack to stick them to the inside of the lid so when I need them they're ready to use.

Even with this system I’ve found it difficult to keep track of the small bracelets. This can be a bit annoying when you're dressing and you can't find the other piece of a pair of bracelets. This is especially a problem with the elastic ones, with the bracelets that open and close the two pieces can be linked together to keep the pair from getting separated. To solve this problem I've recently begun storing the bracelets on safety pins to keep the matching pairs together.

Stay tuned I’ll be posting more techniques for necklaces in the coming weeks. A few readers have requested instructions for belts and turbans and I will be working on those as well. If you have any requests feel free to email me

DIY Deity Jewelery: Necklaces- Part 1

Multi-Stranded Necklaces

These necklaces are easy to make and the technique can be modified to accommodate multiple strands, I have tried up to five strands simply add more needles. Additionally different beads can be used to create endless patterns.
Supplies:
1. Scissors
2. Sewing Thread (I find polyester thread works best for this technique as nylon beading thread is too stiff for this style)
3. Big Beads
4. Seed Beads
5. Extra Fine Beading Needles

Step 1: Cut two lengths of the sewing thread approximately 1m each, then String on one of he beading needles (the beading needles can be a bit difficult to thread, they often come with a ‘threader’ that makes the task a lot easier)onto each piece of thread. Next position the needle in the center of each thread. And tie all the ends together, resulting in two strands of double thread.

Step 2: Now we begin beading. First string on a few of your larger beads passing each bead through both needles. To begin the pattern string on the large bead through both needles followed by your desired pattern on each needle. For my pattern this means passing the large bead through both needles and two seed beds one big bead and two more seed beads on each needle followed by passing another big bead through both needles.
Step 3: Continue with the pattern until the desired length. In this case I had to modify the pattern a bit in the last link to create the length I required. Now you can make the pendant. For this string a big bead through both needles and then on each needle string two seed beads a big bed and another seed bead. Then pass you needles back through the pendant beads except the last seed bead (see step 3a above).

Step 4: Continue the pattern to make the second half of the necklace finishing off with the same number of big beads you began with and tie the two ends of the necklace together. Cut away the excess thread, optionally you can keep a little extra and use an incense stick to burn the ends of the tread to help keep your necklace together however be careful as if you burn too much your necklace will fall apart.
Here are some necklaces I made using this technique the pink and white one for my Govindaji was made using three needles and the green set for Chota Radha Gopinatha was made using four needles. Experiment with different strands and beads and you can create lots of different looks.